1. P Tongwa, R Nygaard, A Blue, B Bai, 2013 “Evaluation of potential fracture-sealing materials for remediating CO2 leakage pathways during CO2 sequestration”, International Journal of Greenhouse Gas Control, 18, 128-138.

  2. IA Hussein, Y Feng, B Bai, 2013, “Chemical EOR”, Journal of Chemistry 2013 (on-line journal).

  3. Y Wang, L Ma, B Bai, G Jiang, J Jin, Z Wang, 2013, “Wettability Alteration of Sandstone by Chemical Treatments”, Journal of Chemistry, 2013 (on-line journal).

  4. A Al-Shareef, P Neogi, B Bai, 2013, “Force based dynamic contact angles and wetting kinetics on a Wilhelmy plate”, Chemical Engineering Science 99, 113-117.

  5. P Tongwa, R Nygaard, B Bai, 2013, “Evaluation of a nanocomposite hydrogel for water shut-off in enhanced oil recovery applications: Design, synthesis, and characterization”, Journal of Applied Polymer Science 128 (1), 787-794.

  6. S Liu, W Kang, R Yang, B Bai, H Zhao, H Fan, B Xu, 2013, “Adsorption of SDBS and Its Effect on Rheology of Preformed Particle Gels”, Journal of Dispersion Science and Technology 34 (4), 539-545.

  7. Bai, B.; Elgmati, M.; Zhang, H; Wei, M., 2013, "Rock Characterization of Fayetteville Sahle Gas Plays," Fuel, 105 (2013), 645-652.

  8. W.L Kang, SR Liu, B Xu, XZ Wang, BT Zhang, BJ Bai, 2013, “Study on Demulsification of a Demulsifier at Low Temperature and Its Field Application”, Petroleum Science and Technology 31 (6), 572-579.

  9. W Kang, S Liu, B Bai, Q Guo, L Ji, L Meng, 2013, “Interaction of Preformed Particle Gel and Nonionic Surfactant Triton X-100”, Polymer Materials Science & Engineering 29 (2), 42-45.

  10. W Kang, Y Ji, B Xu, L Hu, L Meng, H Fan, B Bai, 2014, “Research on association between multi-sticker amphiphilic polymer and water-soluble β-cyclodextrin polymer”, Colloid and Polymer Science, 292 (4), 895-903.

  11. W Kang, S Liu, B Bai, Q Guo, L Ji, L Meng, “Interaction of Preformed Particle Gel and Nonionic Surfactant Triton X-100”, Polymer Materials Science & Engineering 29 (2), 42-45.

  12. Liu Shu-ren, KANG Wan-li; BAI, B.; ZHAO, Hao-yang; MENG Ling-wei, “Interaction of preformed particle gel and sodium dodecyl sulfate, Journal of China University of Petroleum (Edition of Natural Science), 37 (2), 2013.

  13. Q Wu, JT Ok, Y Sun, ST Retterer, KB Neeves, X Yin, B Bai, Y Ma, 2013 “Optic imaging of single and two-phase pressure-driven flows in nano-scale channels”, Lab on a Chip 13 (6), 1165-1171.

  14. Vivek M. Rao, Carlos H. Castano*, Jessika Rojas, Ahlam J. Abdulghani. “Synthesis of Nickel Nanoparticles on Multi-Walled Carbon Nanotubes by Gamma Irradiation.” J. of Radiation Physics and Chemistry 89 (2013) 51-56 (corresponding author).

  15. E.J. Grant, C.M. Posada, R. Divan, A. V. Sumant, D. Rosenmann, L. Stan, A. Avachat, C.H. Castano and H.K. Lee. “Construction of an Ultrananocrystalline Diamond Based Cold Cathode Array for a Flat-Panel X-ray Source.” SPIE Proceedings 87090U (2013) (Peer Reviewed).

  16. Z. A. Kulage, C. H. Castano*, S. Usman, G. Mueller. “Characterization of the Neutron Flux Energy Spectrum at the Missouri University of Science and Technology Research Reactor (MSTR).” Nuclear Engineering and Design 261 (2013) 174-180 (corresponding author).

  17. Steven M. Corns, Daniel A. Ashlock, and K. M. Bryden (2013) “Development of Antibiotic Regimens Using Graph Based Evolutionary Algorithms”, BioSystems, Vol. 114, No. 3, pp. 178-185.

  18. Dinesh Kanigolla*, Elizabeth A. Cudney, and Steven M. Corns (2013) “Six Sigma: Importance of Education Contributing to Industry”, The Journal of Quality and Participation, Vol. 36, No. 1, pp. 34-38.

  19. Elizabeth A. Cudney, Steven M. Corns, and Protyusha DasNeogi* (2013) “A Comparative Analysis of Methodologies of Daily Metroplex Ozone Concentration Prediction”, International Journal of Quality Engineering and Technology, Vol. 3, no. 4, pp. 332-347.

  20. Ivan Guardiola, Cihan Dagli, and Steven M. Corns (2013) “Using University-Funded Research Projects to Teach System Design Processes and Tools,” IEEE Transactions on Engineering Education, Vol. 56:4, pp. 377-384.

  21. Birman, V., Chandrashekhara, K, Hopkins, M.S. and Volz, J.S., “Effects of Nanoparticle Impregnation of Polyurethane Foam on the Performance of Sandwich Beams,” Composites: Part B, Vol. 46, pp. 234-246, 2013.

  22. W. Everhart, S. Lekakh, V. Richards, J. Chen, H. Li  and K. Chandrashekhara, Corner Strength of Investment Casting Shells, “ International Journal of  Metalcasting, Vol. 7,  No.1, pp. 21-27, 2013.

  23. N. Roe, Z.  Huo,  K. Chandrashekhara, A. Buchok and R.A. Brack, “Advanced Moisture Modeling of Polymer Composites,” Journal of Reinforced Plastics  and Composites, Vol. 32, No. 7, pp. 437-449, 2013.

  24. W. Everhart, S. Lekakh, V. Richards, J. Chen,  and K. Chandrashekhara, “Crack Formation during Pattern Firing in the Investment Casting Process, “ International Journal of  Metalcasting, Vol. 7,  No.2, pp. 7-14, 2013.

  25. Z. Hu, H. Li, X. Du, X, and K. Chandrashekhara, “Simulation-Based Time-Dependent Reliability Analysis for Composite Hydrokinetic Turbine Blades,” Structural and Multidisciplinary Optimization, Vol. 47, pp. 765-781, May 2013.

  26. V. Bheemreddy, K. Chandrashekhara, L. R. Dharani, and G. E. Hilmas, “Modeling of Fiber Pull-Out in Continuous Fiber Reinforced Ceramic Composites using Finite Element Method and Artificial Neural Networks,” Computational Materials Science, Vol. 79, pp. 663-673, 2013.

  27. V. Birman, K. Chandrashekhara, M.S. Hopkins, and J. S. Volz, “Strength Analysis of Particulate Polymers,” Composites : Part B, Vol. 54, pp. 278-288, 2013.

  28. V. Menta, R. Vuppalapati, K. Chandrashekhara, T. Schuman, and J. Sha, “Elevated Temperature Vacuum Assisted Resin Transfer Molding Process for High Performance Aerospace Composites,” Polymer International, Vol. 62. pp. 1465-1476, 2013.

  29. S.E. Watkins, K.E. Robison, G.A. Taylor, J.R. Nicholas, K. Chandrashekhara, and J.L. Rovey, “Damage Assessment of Hydrokinetic Composite Turbine Blades Using Fiber Optic Sensors,” Paper 8694-82, Proceedings of the SPIE Smart Structures/NDE Conference, San Diego, CA, Mar. 10-14, 2013.

  30. S. Anandan,  S. Nagarajan, A. Kaur, K. Chandrashekhara, K. and  H. Xiao, “Monitoring of Out-of-Autoclave BMI Composites Using Fiber Optic Sensors,” Paper 8694-21, SPIE Smart Structures/NDE Conference, San Diego, CA., Mar. 10-14, 2013.

  31. A. Kaur, S. Nagarajan,  S. Anandan,   L. Yuan,  K. Chandrashekhara, S. Watkins, and  H. Xiao, H., “Embeddable Fiber Optic Strain Sensor for Structural Monitoring,” Paper 8692-63, SPIE Smart Structures/NDE Conference, San Diego, CA., Mar. 10-14, 2013.

  32. H. Li, G. A. Taylor, A. M. Abutunis, K. Chandrashekhara, A. R. Kashyap and J. W. Kimball “Design and Performance Evaluation of a Horizontal Axis Hydrokinetic Turbine System,” Paper Number 3166, pp. 1-15, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, May 6-9, 2013.

  33. Z. Huo, V. Bheemreddy and K. Chandrashekhara, “Modeling and Simulation of Moisture Diffusion in Hybrid Fiber-reinforced Polymer Composites,” Paper # 3163, pp. 1-15, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, May 6-9, 2013.

  34. S. Anandan, S. Nagarajan, K. Chandrashekhara, T. Berkel and D. Pfitzinger,  “ Cure and Process Optimization for Manufacturing BMI Composites Using OOA Process”, Paper # 3162, pp. 1-14, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, May 6-9, 2013.

  35. V. Bheemreddy, Z. Huo, K. Chandrashekhara and R.A. Brack, “Process Optimization of Composite Flex Beams Using Neural Networks”,  Paper # 3164, pp. 1-15, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, May 6-9, 2013.

  36. M. Mohamed, Z. Huo, S. Hawkins, K. Chandrashekhara, V. Birman and J. Volz, “Moisture Effects on Performance of Polyurethane Composite Sandwich Panels Manufactured Using VARTM,”  Paper # 3165, pp. 1-15, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, May 6-9, 2013.

  37. J. Wei, M.K. Dehdashti, L. R. Dharani, K. Chandrashekhara, G. E. Hilmas and W.G. Fahrenholtz, “Simulation of Thermal and Mechanical Response of (Zr,W)B2 Ceramic after Oxidation,” Proceedings of the 2nd International Conference on Engineering and Innovative Materials (ICEIM), pp. 1-10, Shanghai, China, Sept. 7-8, 2013.

  38. F. Meng*, D. Haughton*, B. Chowdhury, M. L. Crow, G. T. Heydt, “Distributed Generation and Storage Optimal Control with State Estimation,” IEEE Transactions on Smart Grid, Vol. 4, no. 4, December 2013.

  39. S. Mehraeen*, T. Dierks*, S. Jagannathan, M. L. Crow, “Zero-sum Two-player Game Theoretic Formulation of Affine Nonlinear Discrete-time Systems Using Neural Networks” IEEE Transactions on Cybernetics, Vol. 43, no. 6, pp. 1641-1655, December 2013.

  40. T. Gamage*, T. Roth*, B. McMillin, M. L. Crow, “Mitigating Event Confidentiality Violations in Smart Grids: An Information Flow Security-based Approach,” IEEE Transactions on Smart Grid, Vol. 4, no. 3, pp. 1227-1234, September 2013.

  41. K. Wang* and M. L. Crow, “The Fokker-Planck Equation for Power System Stability Probability Density Function Evolution,” IEEE Transactions on Power Systems, Vol. 28, no. 3, pp. 2994-3001, August 2013.

  42. Joe D. Guggenberger*, Andrew Curtis Elmore, Mariesa L. Crow, “Predicting performance of a renewable energy-powered microgrid throughout the United States using typical meteorological year 3 data,”  Renewable Energy, Vol. 55, pp. 189-195, July 2013.

  43. Lisheng Shi*, B. Bhaddipadiga*, M. Ferdowsi, M. L. Crow, “Improving Dynamic Response in Flying Capacitor 3-Level Buck Converter,” IEEE Transactions on Power Electronics, Vol. 28, no. 5, pp. 2356-2365, May 2013.

  44. T. Odun-Ayo* and M. L. Crow, “An Analysis of Power System Transient Stability Using Stochastic Energy Functions,” International Transactions on Electrical Energy Systems, Vol. 23, no. 2, pp. 151-165, March 2013.

  45. Murali Bottu*, M. L. Crow, A. C. Elmore, S. Atcitty, “A Power Electronic Conditioner Using Ultracapacitors to Improve Wind Turbine Power Quality,” Smart Grid and Renewable Energy, Vol. 4, no. 1, pp. 69-75, February 2013.

  46. Erica Collins*, A. C. Elmore, and M. L. Crow, “Using Conditional Probability to Predict Solar-Powered Pump-and-Treat Performance,” ASCE Journal of Hazardous, Toxic, and Radioactive Waste Management, Vol. 17, no. 1, pp. 31-17, January 2013.

  47. Maggie Cheng, Mariesa Crow, R. Erbacher, “Vulnerability Analysis of a Smart Grid with Monitoring and Control System,” 8th Cyber Security and Information Intelligence Research Workshop (CSIIRW), Oak Ridge, TN, January 2013.

  48. Sarikaya, V. Petrovsky, and F. Dogan, “Development of the Anode Pore Structure and its Effects on the Performance of Solid Oxide Fuel Cells,” Int. J. of Hydrogen Energy, 38 (24) 10081-10091 (2013).

  49. Buyukaksoy, V. Petrovsky, and F. Dogan, “Solid Oxide Fuel Cells with Symmetrical Pt-YSZ Electrodes Prepared by YSZ Infiltration,” J. Electrochem. Soc., 160 (4) F482-F486 (2013).

  50. S. Siddabattuni, T. P. Schuman, V. Petrovsky and F. Dogan, “Impedance Analysis of Dielectric Nanoparticles Enabled via a Self-Assembled Monolayer,” J. Am. Ceram. Soc. 96 [5] 1490-1496 (2013).

  51. S. Siddabattuni, T. P. Schuman and F. Dogan, “Dielectric Properties of Polymer-Particle Nanocomposites Influenced by Electronic Nature of Filler Surfaces,” ACS Appl. Materials and Interfaces, 5 [6] 1917-1927 (2013).

  52. Sarikaya and F. Dogan, “Effect of Various Pore Formers on the Microstructural Development of Tape-Cast Porous Ceramics,” Ceram. Int., 39 [1] 403-413 (2013).

  53. 55.  Sarikaya, V. Petrovsky and F. Dogan, “Silver based Perovskite Nanocomposites as Combined Cathode and Current Collector Layers for Solid Oxide Fuel Cells,”J. Electrochem. Soc., 159 [11] F665-F669 (2012).

  54. Buyukaksoy, V. Petrovsky, and F. Dogan, “Stability and Performance of YSZ Infiltrated Platinum Electrodes for Sensors and Solid Oxide Cells,” Mater. Res. Soc. Proc. Vol. 1542, MRS Spring Meeting (2013).

  55. Sarikaya, V. Petrovsky and F. Dogan, “High Temperature Stability of Silver Based Porous Nanocomposites for Electrochemical Devices,” Mater. Res. Soc. Proc. Vol. 1542, MRS Spring Meeting (2013).

  56. Sarikaya, A. Buyukaksoy and F. Dogan, “Current Status of Fabrication of Solid Oxide Fuel Cells for Emission-Free Energy Conversion,” Causes, Impacts and Solutions to Global Warming, Edit.: I. Dincer et al.Springer New York, 515-523 (2013).

  57. Sarikaya, V. Petrovsky and F. Dogan, “Development of a silver based stable current collector for solid oxide fuel cell cathodes,” Mater. Res. Soc. Proc. Vol. 1385, 35-39 (2012).

  58. M. T. Domonkos, S. Heidger, D. Brown, T. Cavazos, A. Devoe, F. Dogan, D. Gale, J. O’Loughlin, J. Parker, D. Sandoval, K. Slenes, W. Sommars and J. Watrous, “Solid Dielectric Transmission Lines for Pulsed Power,” 2012 IEEE International Power Modulator and High Voltage Conference, San Diego, CA; Article No 6518707, pp. 174-179 (2012).

  59. Sarikaya, V. Petrovsky, and F. Dogan, “Effect of Microstructural Evolution on the Electrochemical Properties of High Performance SOFCs,” Electrochem. Soc. Transactions 45 [1], 25-32 (2012).

  60. Sarikaya, V. Petrovsky, and F. Dogan, “Electrochemical Properties of Silver Based Composite Electrodes for SOFC Cathodes and Current Collectors Solid Oxide Electrodes,” Electrochem. Soc. Transactions 45 [1], 327-332 (2012).

  61. Smith, D.*, Elmore, A.C. 2013. A modification of freeze-core technology for collecting granular fluvial sediment samples.  Submitted to Env. Earth Sci. on March 28, 2013.  DOI 10.1007/s12665-013-2805-1.

  62. Cortes Di Lena, Y.*, Elmore, A.C., Conroy, J.P.* 2013. Effectiveness of capture zones generated by intermittent pumping of a PV-powered pump-and-treat system without energy storage.  Remediation, 23(3), 111-122.

  63. Cortes Di Lena, Y.*, Brown, G.**, Huck, J.**, and Elmore, A. C. 2013. Effects of chlorination on silver coated ceramic pot filters (CPFs). World Environmental & Water Resources Congress, Cincinnati, OH, May 20-23.

  64. Elmore, A.C. 2013. A review of Missouri S&T students’ studies of drinking water systems in rural Guatemala.  World Environmental & Water Resources Congress, Cincinnati, OH, May 20-22.

  65. L.Sun, X. Yang, and J. Gao, “Loss-compensated broadband epsilon-near-zero metamaterials with gain media,” Applied Physics Letters, 103, 201109 (2013).

  66. X. Yang, C. Hu, H. Deng, D. Rosenmann, D. A. Czaplewski, and J. Gao, “Experimental demonstration of near-infrared epsilon-near-zero multilayer metamaterial slabs,” Optics Express, 21, 23631 (2013).

  67. X. R. Jin, L. Sun, X. Yang, and J. Gao, “Quantum entanglement in plasmonic waveguides with near-zero mode indices,” Optics Letters, 38, 4078 (2013).

  68. L. Sun, J. Gao and X. Yang, “Giant optical nonlocality near the Dirac point in metal-dielectric multilayer metamaterials,” Optics Express, 21, 21542 (2013).

  69. J. Gao, L. Sun, H. Deng, C. J. Mathai, S. Gangopadhyay, and X. Yang, “Experimental realization of epsilon-near-zero metamaterial slabs with metal-dielectric multilayers,” Applied Physics Letters, 103, 051111 (2013).

  70. L. Sun, J. Gao and X. Yang, “Broadband epsilon-near-zero metamaterials with step-like metal-dielectric multilayer structures,” Physical Review B, 87, 165134 (2013).

  71. Y. He, H. Deng, X. Jiao, S. He, J. Gao and X. Yang, “Infrared perfect absorber based on nanowire metamaterial cavities,” Optics Letters, 38, 1179-1181 (2013).

  72. H. Qin, J. W. Kimball, “Solid state transformer architecture using ac-ac dual active bridge converter,” IEEE Transactions on Industrial Electronics, vol. 60, pp. 3720-3730, Sept. 2013.

  73. Edward C Kinzel, Robert L Brown, James C Ginn, Brian A Lail, Brian A Slovick, Glenn D Boreman, “Design of an MOM diode-coupled frequency-selective surface,” Microwave and Optical Technology Letters, 55, 489-493 (2013).

  74. Jeffrey D’ Archangel, Eric Tucker, Ed Kinzel, Eric A. Muller, Hans A. Bechtel, Michael C. Martin, Markus B. Raschke, and Glenn Boreman, “Near- and far-field spectroscopic imaging investigation of resonant square-loop infrared metasurfaces,” Optics Express, 21, 17150-17160 (2013).

  75. V. Sinha, A. V. Avachat and H. K. Lee (corresponding author, 100%), “Design and Development of a Neutron/X-Ray Combined Computed Tomography System at Missouri S&T,” J. Radioanal. Nucl. Ch., 296 (2), pp.799-806, 2013. (Impact Factor = 1.238).

  76. K. A. Mohd, H. K. Lee (corresponding author, 100%), M. H. Al-Dahhan, “New Local Liquid Velocity Measurement Technique in Trickle Bed Reactors (TBRs) Using X-Ray Digital Industrial Radiography And Particle Tracking (DRPT) Techniques,” Transactions of the American Nuclear Society, Vol. 109, pp. 515-516, 2013.

  77. V. Sinha and H. K. Lee (corresponding author, 100%), “Performance Evaluation of a Combined Neutron and X-ray Digital Imaging System,” SPIE Smart Structures/NDE, SPIE Vol. 8694, pp. 86940R-1-11, 2013.

  78. X. Liu, A. Srivastava, H. K. Lee, and J. Hsieh, “Monte Carlo simulation of bowtie scatter on a wide-cone low dose CT system,” SPIE Medical Imaging, SPIE Vol. 8668, pp. 86685W-1-7, 2013.

  79. M. Abir, F. Islam, D. Wachs and H. K. Lee (corresponding author, 100%), “Multiscale based adaptive contrast enhancement,” SPIE Electronic Imaging, SPIE Vol. 8657, pp. 86570X-1-9, 2013.

  80. Yunhui Gong, Rajankumar L. Patel, Xinhua Liang, Diego Palacio, Xueyan Song, John B. Goodenough, and Kevin Huang, Atomic layer deposition functionalized composite SOFC cathode La0.6Sr0.4Fe0.8Co0.2O3-δ-Gd0.2Ce0.8O1.9: Enhanced long-term stability, Chemistry of Materials, 25 (21), 4224–4231, 2013.

  81. Yunhui Gong, Diego Palacio, Xueyan Song, Rajankumar L. Patel, Xinhua Liang, Xuan Zhao, John B. Goodenough, and Kevin Huang, Stabilizing nanostructured solid oxide fuel cell cathode with atomic layer deposition, Nano Letters, 13 (9), 4340-4345, 2013.

  82. Zeyu Shang 1, Rajankumar L. Patel 1, Brian W. Evanko,and Xinhua Liang, Encapsulation of supported metal nanoparticles with an ultra-thin porous shell for size-selective reactions, Chemical Communications, 49 (86), 10067-10069, 2013 (featured article; 1Both authors contributed equally to this work.)

  83. Xinhua Liang and Chengjun Jiang, Atomic layer deposited highly dispersed platinum nanoparticles supported on nonfunctionalized multiwalled carbon nanotubes for the hydrogenation of xylose to xylitol, Journal of Nanoparticle Research, 15, 1890, 2013.

  84. Ziemer, Norbert1, Long, Suzanna, Mackie, Brian, Aase, Gerald1, and Gory, Deborah1, (2013) “Strategic Matching and Linkage Development by an Innovative Business System,” Issues in Information Systems 14: (2): 202-209.

  85. Long, Suzanna2 and Carlo, Hector (2013) “Collaborative Teaching and Learning through multi-Institutional Integrated Group Projects,” Decision Sciences Journal of Innovative Education 11 (3): 233-241.

  86. 88.  Rangarajan, Kiran1, Long, Suzanna2, Tobias, Alan, and Keister, Marie (2013), “The Role of Stakeholder Engagement in the Development of Sustainable Rail Infrastructure Systems,” Research in Transportation Business and Management 7: 106–113, Invited Article for Special Issue on Sustainability in Transportation, DOI information: 10.1016/j.rtbm.2013.03.007.

  87. Riley, Tyria1; Cudney, Elizabeth; and Long, Suzanna (2013) “A Comparative Analysis of Defensive Routines in Engineering Managers versus Non-Engineering Managers”, Engineering Management Journal 25 (4): 44-52.

  88. Long, Suzanna2, Shoberg, Tom, Ramachandran, Varun1, Corns, Steven, and Carlo, Hector, “Integrating Complexity Into Data-Driven Multi-Hazard Supply Chain Network Strategies,” CaGIS/ASPRS 2013 Specialty Conference, San Antonio, TX, October 2013. Invited.

  89. Schmidt, Sean1 and Long, Suzanna2, “An Integrative Literature Review of the Impact of Incentivized Energy Reduction Programs,” Proceedings of the American Society of Engineering Management International Annual Conference, Bloomington, MN, October 2013.

  90. Egbue, Ona and Long, Suzanna, “Analysis of Challenges Affecting the Successful Deployment of Electric Vehicles,” Proceedings of the American Society of Engineering Management International Annual Conference, Bloomington, MN, October 2013.

  91. Egbue, Ona3, Long, Suzanna2, and Ng, Ean3, “Energy Sustainability in Transportation Systems: Translating Electric Vehicle Research Results to 7th and 8th Graders,” Proceedings of the American Society of Engineering Education Annual Meeting, Atlanta, GA, June 2013.

  92. Grasman, Kellie S., Cernusca, Daniel, and Long, Suzanna, “Student Perceptions of Online Resources as Predictors of Performance in a Hybrid Classroom: Exploratory Findings from a Large Engineering Economics Course”, Proceedings of the American Society of Engineering Education Annual Meeting, Atlanta, GA, June 2013.

  93. Ng, Ean3, Long, Suzanna, Smith, Brian and Sun, Carlos, “A Framework for Improving Roadway Work Zone Safety Using Action Research,” Proceedings of the IIE IERC Annual Meeting, San Juan, Puerto Rico, May 2013. Invited Session.

  94. Shoberg, Thomas, Long, Suzanna, Corns, Steven, Ramachandran, Varun1, and Carlo, Hector, “Modeling Resiliency in Urban Supply Chain Networks in the Wake of Extreme Event Disasters,” American Association of Geographers Annual Meeting, Los Angeles, CA, April 2013.

  95. Long, Suzanna2, Harper, Jennifer, and Stone, William, “LED Useful Life Replacement Strategies,” as part of the AASHTO National High-Value Research Award Showcase, Proceedings of the Transportation Research Board Annual Meeting, January 13-17, 2013, Washington, DC. Invited Session.

  96. Niyogi, D.K., J.S. Harding, and K.S. Simon.  2013.  Organic matter breakdown as a measure of stream health in New Zealand streams affected by acid mine drainage.  Ecological Indicators.  24:510-517.